Introduction to the Four Major Categories of Industrial Displays

1. Open industrial display screen

Open industrial display screens have no display panel or back shell, only internal display screens, control boards, power supplies, etc. Most customers' applications mainly have beautiful outer shells in small equipment and volume situations, without space for general display screens such as ATM machines and commercial POS screens.

2. Embedded industrial display screen

The embedded industrial display is embedded in the customer's equipment, which requires a medium to large control panel and console. The embedded industrial display only has a panel, and the remaining part is embedded in the customer's equipment and fixed with a fixed card (the control panel and console only need to open square holes according to the opening size of the embedded display). There is no need to open installation holes elsewhere.

3. Rack mounted industrial display screen

Frame type industrial displays are mainly installed on 19 inch cabinets, with a standard width of 19 inches. The holes are opened according to the standard u number, but some customers have their own non-standard cabinets that must be designed and produced according to their size.

4. Wall mounted industrial display screen

Wall mounted industrial displays are equipped with threaded holes on the back shell, which can be hung through threaded fixation. They can not only be hung on the wall, but also installed on customer equipment. The angle can be adjusted according to customer requirements, and with appropriate installation arms, they can stay in any position at will.